Atacama Race Shell

  • Size

244.30 244.3 USD 270.33

£ 215.83

This combination does not exist.


The Atacama Race Shell is a lightweight waterproof jacket designed for riders who use a neck brace. It features AS-Tex 210D 3 layer nylon 6-6 ripstop fabric that is super breathable, windproof and waterproof to a hydrostatic head of 28,000mm. The jacket can be used in three configurations, no collar, standard collar or neck brace collar. When not being used the jacket will pack down into its own pocket sack. The Atacama Race Shell is well suited to race / rally riders who need a waterproof layer that works with protective equipment with minimal weight. Weight - 497g.


adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider

DESIGNED FOR NECK BRACES

The Atacama Race Shell comes with two collars. One for standard fit and one designed to fit over the top of your neck brace.

Don't use a neck brace? Take a look at The Aqua Pac Jacket here.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider  dakar rally

BORN IN THE DAKAR RALLY

The Atacama Race Shell was built to help Lyndon Poskitt get to the finish line of the Dakar Rally. Twice.

Watch our Dakar film here

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider adv layering

ADV LAYERING

Built to work with the Adventure Spec Layering system. The Atacama Race Shell is a waterproof outer layer and is sized to work perfectly over mid and out layers like The Atacama Race Jacket.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider

3 LAYER WATERPROOF FABRIC

Light and tough, the 3 layer ripstop fabric is breathable and extremely waterproof. A hydrostatic head of 28,000mm is designed to withstand prolonged rain whilst riding.

Find out more about our fabrics here

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider long tail

THE LONG TAIL

A generous cut on the rear of the jacket covers your bum and keeps the water out while stood up on the pegs in the rain and mud. It also helps keep you dry when you sit down on that soggy log at camp.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider

THROTTLE FRIENDLY CHEST POCKET

A chest pocket on the right side of the jacket allows use with your left hand, whilst you keep your right hand on your throttle and brake lever.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider light is right

FOLDS INTO ITS POCKET

Stuffs into its own reversible pocket for ultimate compact storage.

*Not including the large neck brace collar. 

LIGHT IS RIGHT

At just 497g (size M) the Atacama Race Shell is light to wear and takes up very little pack room in your luggage.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider adv layer pouch magadan panniers

MATCH IT WITH THE ADV LAYER POUCH

Stuffs perfectly into the ADV Layer Pouch. Our Magadan luggage system is designed to make sure you have all your layers ready when you need them.

adventure spec Atacama Race Shell neck brace waterproof motorcycle motorbike jacket adv biker rider

MADE IN EUROPE

Manufactured to high standards in our EU factory.

adventure spec atacama jacket waterproof motorcycle singletrack pant

KEEP YOUR JACKET WATERPROOF FOR LONGER

It's really easy to keep your jacket waterproof for longer. 

Have a look at our top tips here

adventure spec waterproof motorcycle motorbike trousers pant

WATERPROOF TOP AND BOTTOM

Pair the Singletrack Pant and the Atacama Race Shell to be ready for the wettest of weather conditions.

Buy The Singletrack Pant here

MADE IN EUROPE

Manufactured to high standards in our EU factory.


Visit our EU clothing factory on YouTube here

  • This is a Leatt neck brace compatible outer shell jacket and is designed to be wind and water resistant (we have found it compatible with most other neck braces).

  • The jacket does not have any insulation, impact or abrasion resistance 

  • This jacket is made from a 3-layer laminated fabric, which means it does not need any lining to be waterproof. It appears as if it is a single layer of waterproof material.

  • The jacket weighs 460g and packs down into its own chest pocket which is 150mm x 150mm x 100mm

Probably the world's lightest neck brace compatible waterproof shell. Designed as a waterproof, windproof and superlight pocket-packable jacket to be thrown on during a cold early morning rally liaison (or a rare desert shower) this jacket redefines adventure/rally lightweight rider wear when used over the mesh Atacama Race Jacket. 

Made from a 210D 3 layer ripstop fabric designed specifically by AS for making lightweight motorcycling clothing, the fabric keeps the weight and packed size to a minimum whilst enabling superior levels of wind and waterproofing.

The jacket is designed to be used in three configurations: 

  1. No collar attached at all, open necked around a Leatt style neck brace for maximum cooling flexibility 

  2. Neck brace collar attached, to close the jacket down into a fully water and windproof shell for those high altitude Dakar stages, cold early morning desert liasons or as protection against that random downpour 

  3. With the (additional extra) non-neckbrace collar attached, for those times off your bike in the cold or wet Malle Moto bivouac when you’re struggling with the inevitable bent nav tower!

The jacket also comes with a single throttle/brake friendly chest pocket (which the jacket can be packed into) and lots of reflective panels for maximum visibility on those early morning/late night rides.

 
 

 
 

 
 

 
 

 
 

Neck Brace Friendly

The Atacama Race Jacket and Race Shell are perfect for riders who use neck braces. 

Take a look at the Atacama Race Jacket Here