Aqua Pac Jacket Black
The Aqua Pac Jacket is a tough, lightweight waterproof jacket. It features AS-Tex 210D 3 layer nylon 6-6 ripstop fabric that is super breathable, windproof and waterproof to a hydrostatic head of 28,000mm. A longer tail helps to keep water and mud out when riding in the standing position. When not being used the jacket packs down into its own pockets sack. The Aqua Pac Jacket is designed for lightweight adventure, trail and dual sport riders who need to make sure they have a quality waterproof layer at all times but require it to take up minimal space when not being used. Weight - 410g.
SPECIAL OFFER!
20% off any of this Aqua Pac Jacket when bought with The Supershirt. Just add both items to cart for discount.
BUY SUPERSHIRT HERE
THE AQUA PAC JACKET
WATERPROOF LAYER
Always there
The Aqua Pac jacket is the waterproof that's always stashed away ready for when you need it.
ADV Layering
Built to work with the Adventure Spec Layering system. The Aqua Pac Jacket is a waterproof outer layer and is sized to work perfectly over mid and out layers like The Linesman Jacket or the Mongolia Jacket.
3 Layer Waterproof Fabric
Light and tough, the 3 layer ripstop fabric is breathable and extremely waterproof. A hydrostatic head of 28,000mm is designed to withstand prolonged rain whilst riding.
The long tail
A generous cut on the rear of the jacket covers your bum and keeps the water out while stood up on the pegs in the rain and mud. It also helps keep you dry when you sit down on that soggy log at camp.
Taped seams
All seams are taped to help prevent water ingress.
Folds into its pocket
Stuffs into its own reversible pocket for ultimate compact storage.
See how to stuff the Aqua Pac here
Find out more about our most packable layer here
Image shows Atacama Race Shell with the same stuff pocket feature.
Throttle friendly chest pocket
A chest pocket on the right side of the jacket allows use with your left hand, whilst you keep your right hand on your throttle and brake lever.
See it in action
Watch the Aqua Pac Jacket in action in our latest adventure film!
"It's tiny, it's waterproof, it works brilliantly with the layering system. What's not to like. It's a take everywhere, all the time type garment. I'll never stress over whether it'll rain, or which jacket to take again."
Be seen
Reflective logos light up in headlights on dark roads.
Cinch tight
Pull the collar tight to prevent water running down your neck.
Light is Right
At just 410g (size M) the Aqua Pac Jacket is light to wear and takes up very little pack room in your luggage.
Match it with the ADV Layer Pouch
Stuffs perfectly into the ADV Layer Pouch. Our Magadan luggage system is designed to make sure you have all your layers ready when you need them.
Pair it with The Supershirt
Wear The Supershirt underneath for light and breathable CE AA protection.
Dry legs
The Singletrack Pant is built for the toughest, wettest dirt adventures.
Keep your Jacket waterproof for longer
It's really easy to keep your jacket waterproof for longer.
Made in Europe
Manufactured to high standards in our EU factory.
This is an outer shell jacket and is designed to be wind and water resistant
The jacket does not have any insulation, impact or abrasion resistance
This jacket is made from a 3-layer laminated fabric, which means it does not need any lining to be waterproof. It appears as if it is a single layer of waterproof material.
The jacket weighs 410g and packs down into its own chest pocket which is 150mm x 150mm x 100mm
Our lightest, most packable waterproof jacket.
You’d think it would be relatively straightforward making such a focussed jacket, and it is… if you have the right fabric…
The problem was that nobody made the fabric that we needed, so we made our own.
It needed to be light, tough, superbly waterproof, breathable and totally windproof.
Enter ASTex. Designed and made by us with no compromise, for nothing other than lightweight adventure motorcycling.
A 210D super strong nylon 6-6 face material in a ripstop configuration with a PU breathable/waterproof lining that is 100% windproof and will withstand a hydrostatic head of 28m (28000mm).
Unlike some fabrics which use a porous membrane technology (that lets air through) not only is our PU membrane totally windproof, which means we can use a single layer over the entire jacket to reduce weight, but it doesn’t rely on your body warmth to drive the damp from the inside of the jacket to the outside. So, even if you get wet AND cold with the jacket on (hard sweaty technical singletrack followed by a long cold road section anyone?) our fabric will keep driving that moisture outwards to get you warm and dry as soon as possible.
It took us two years to develop this fabric, but once it was ready the design of the jacket came quickly. Long sleeves to support your forward reach to the bars, a great fit and a single throttle friendly chest pocket that the jacket packs down into. It’s very much part of the family of Adventure Spec waterproof jackets.
At a mere 410g this lightweight waterproof shell may be diminutive, but it packs a big punch for its weight and has already had many hours of testing in some of Northern Europes worst winter conditions.
Watch Adventure Spec gear in action on the Trans Euro Trail
Find out how we put Adventure Spec clothing together for multi day TET adventures